Japanese Journal of Applied Physics · 2021 · 20 citations · 23 references
Natural SciencesMaterials EngineeringMaterials ScienceAcousticsComputational AcousticsMetallurgyAcoustic MaterialsAcoustic Wave PropagationPhysical AcousticsTransducer TechnologyBandwidthDissimilar Material BondingFractional BandwidthMetallizationQuartzResonanceSurface Acoustic Waves
Abstract The enhancement of high-order surface acoustic wave (SAW) harmonics by increasing the metallization ratio was theoretically and experimentally investigated in high-performance bonded dissimilar-material structures. The simulation using a finite element method for 36°Y-cut X-propagating LiTaO 3 (36°YX-LT)/AT-cut 90°X-propagating quartz (AT90°X-quartz) and 27°YX-LiNbO 3 /AT90°X-quartz was performed by setting the metallization ratio of the interdigital transducer to a/p = 0.8 ( a : electrode width, p : pitch), and the LT and LN thin-plate thicknesses to h / λ = 0.05 ( λ : wavelength) and 0.1, respectively. The fractional bandwidths for 36°YX-LT/AT90°X-quartz and 27°YX-LN/AT90°X-quartz were obtained to be 1.6% and 4.0%, respectively, which were larger than those for single LT and LN. For a leaky SAW (LSAW) resonator with a / p = 0.8 fabricated on 36°YX-LT/AT0°X-quartz, the resonance properties and temperature coefficient of frequency of LSAW fundamental waves and harmonics were measured. The measured fractional bandwidth increased from 0.8% to 1.4% for single LT.
23
High-Performance SAW Resonator on New Multilayered Substrate Using LiTaO<sub>3</sub>Crystal
Tsutomu Takai, Hideki Iwamoto, Yuichi Takamine et al. · IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control · 2017 · 259 citations
Natural Sciences, Materials Engineering, Materials Science +15
Jun‐ichi Kushibiki, Izumi Takanaga, Mototaka Arakawa et al. · IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control · 1999 · 179 citations
Tetsuya Kimura, Yutaka Kishimoto, Masashi Omura et al. · Japanese Journal of Applied Physics · 2018 · 99 citations
Natural Sciences, Electrical Engineering, Materials Science +14