Materials Technology · 2021 · 23 citations · 21 references
Natural SciencesMaterials EngineeringMaterials ScienceBiomaterialsInorganic ChemistryNanomaterialsCalcium Phosphate MaterialsCarbon NanomaterialsInorganic NanoparticlesNanocompositesNanostructured BiomaterialsQuantum DotsCarbon DotsCarbon Quantum DotsHydrothermal ProcessingHydroxyapatite NanocrystalsMicrowave Irradiation EffectsNano-hydroxyapatite MaterialsPhotoluminescencePhotoluminescence Spectroscopy
The objective of the present investigation is to functionalise nitrogen-doped carbon quantum dots (NCQDs) with hydroxyapatite (HAp) and study photoluminescence of the composites under ultraviolet radiation. NCQDs were prepared from microwave irradiation of 3:1 molar ratio of urea and citric acid mixture at 750 W for ~5 min. HAp was obtained via wet-chemical process from reacting 1 mol of calcium nitrate with 0.6 mol of ammonium dihydrogen phosphate at ~37°C for 15 h under basic pH (<8). NCQDs/HAp was synthesised from the hydrothermal method by mixing 5–15 mL aqueous solution of NCQDs with 1 g of HAp and autoclaving the mixtures at 100°C for 1 hour. The samples were characterised using diffraction, spectroscopic and microscopic techniques. Pure and nanoscale crystalline NCQDs/HAp composites, with an average particle size of 45 nm, were observed. The NCQDs/HAp resulted in higher photoluminescence than the HAp.
21
Abdoul Karim Sekone, Yu‐Bin Chen, Ming‐Chang Lu et al. · Nanoscale Research Letters · 2016 · 1K citations · Full text
Natural Sciences, Materials Engineering, Materials Science +17
Peng Wu, Wei Li, Qiong Wu et al. · RSC Advances · 2017 · 295 citations · Full text
Natural Sciences, Materials Engineering, Materials Science +16
Aschalew Tadesse, Mebrahtu Hagos, Dharmasoth Ramadevi et al. · ACS Omega · 2020 · 208 citations · Full text