Scientific Reports · 2020 · 87 citations · 28 references
Natural SciencesMaterials EngineeringMaterials ScienceCorrosion ScienceMechanical Behavior Of MaterialsMetallic MaterialsAlloysCorrosion EngineeringCorrosion KineticsCorrosion MechanismsCorrosion-resistant MaterialsMetalsCorrosion BehaviorCorrosion ProcessesDendritic MorphologyHigh-entropy AlloysMicrostructure Effects On CorrosionMicrostructure-corrosion RelationshipsPolarization ResistancePotentiodynamic Polarization
In this study the effect of three different nickel concentration on the microstructure, hardness and corrosion properties of high entropy alloys (HEAs) from AlCrFeCoNi system as an alternative material for medical instruments fabrication was investigated. The analyzed HEAs were AlCrFeCoNix obtained by vacuum arc remelting from high purity raw materials and having nickel atomic ratio x = 1.0, 1.4 and 1.8. The microscopy examination revealed the dendritic morphology for the reference alloy (AlCrFeCoNi) and that the extent of the interdendritic areas increased with the concentration of nickel while Cr was more segregated in the interdendritic areas than in dendrites. Hardness values decreased as the percentage of nickel increased due to the dissolution of the precipitates in a nickel-rich matrix and consequently the formation of continuous solid solutions. The corrosion properties of the synthesized HEAs were evaluated using a potentiodynamic polarization method. The alloys were immersed in Simulated Body Fluid during one week and the corrosion parameters were recorded. The low corrosion rates, low corrosion currents and high polarization resistance attest the good stability of these HEAs in simulated biological environment indicating their possible use for surgical and dental instruments.
28
High-entropy alloy: challenges and prospects
Y.F. Ye, Q. Wang, Jian Lü et al. · Materials Today · 2015 · 3K citations · Full text
Natural Sciences, Materials Engineering, Materials Science +17
Grain growth and the Hall–Petch relationship in a high-entropy FeCrNiCoMn alloy
W.H. Liu, Yuan Wu, Junyang He et al. · Scripta Materialia · 2012 · 892 citations
Natural Sciences, Materials Engineering, Materials Science +16