Wavelength tuning and stabilization of microring-based filters using silicon in-resonator photoconductive heaters

Hasitha Jayatilleka, K. Murray, Miguel Ángel Guillén-Torres, Michael Caverley, Ricky Hu, Nicolas S. B. Jaeger, Lukas Chrostowski, Sudip Shekhar

Optics Express · 2015 · 147 citations · 25 references

DOIFull text

Open access

Concepts

TL;DR

Series‑coupled microring resonator filters can be automatically tuned by photoconductive heaters that monitor light intensity and sequentially align each ring to the laser wavelength. The authors integrated photoconductive heaters into microring resonator filters to automatically tune and stabilize the resonance wavelength to match the input laser. The n‑doped resistive heaters exhibit high photoconductive responsivity, enabling automatic wavelength stabilization of first‑ and second‑order MRR filters without additional implants or photodetectors, and achieving open eye diagrams at 12.5 Gb/s under temperature variations of 5 °C.

Abstract

We demonstrate that n-doped resistive heaters in silicon waveguides show photoconductive effects with high responsivities. These photoconductive heaters, integrated into microring resonator (MRR)-based filters, were used to automatically tune and stabilize the filter's resonance wavelength to the input laser's wavelength. This is achieved without requiring dedicated defect implantations, additional material depositions, dedicated photodetectors, or optical power tap-outs. Automatic wavelength stabilization of first-order MRR and second-order series-coupled MRR filters is experimentally demonstrated. Open eye diagrams were obtained for data transmission at 12.5 Gb/s while the temperature was varied by 5 °C at a rate of 0.28 °C/s. We theoretically show that series-coupled MRR-based filters of any order can be automatically tuned by using photoconductive heaters to monitor the light intensity in each MRR, and sequentially aligning the resonance of each MRR to the laser's wavelength.

References

25