The Aeronautical Journal · 2004 · 55 citations · 13 references
EngineeringAerospace EngineeringAerodynamicsTunnel EngineeringWind EngineeringAerodynamic DesignExperimental AerodynamicsExternal AerodynamicsTurbulenceTurbulent FlowWind-tunnel TestingBoundary Layer Wind Tunnel TestingDesign MethodologyExperimental Transonic Wind TunnelsFlat Plate Boundary LayersFlow UniformityMeasured Energy PerformanceTurbulent Boundary LayersVelocity
Abstract The design methodology and performance of Loughborough University’s new 1·9m × 1·3m, indraft wind tunnel is discussed in the following paper. To overcome severe spatial and financial constraints, a novel configuration was employed, with the inlet and exit placed adjacent to each other and opened to atmosphere. Using a fine filter mesh, honeycomb, two turbulence reduction screens and a contraction ratio of 7·3, flow uniformity in the working area of the jet at 40ms -1 is shown to be within 0·3% deviation from the mean velocity, with turbulence intensity in the region of 0·15%. Working section boundary layer characteristics are shown to be consistent with that of a turbulent boundary layer growing along a flat plate, which originates at the point of inflection of the contraction. A maximum velocity of 46ms -1 was achieved from a 140kW motor, compared to a prediction of 44ms -1 , giving an energy ratio of 1·42. Comparison between theoretical and measured performance metrics indicate differences between the way modules perform when part of a wind tunnel system compared to data gathered from test rigs.
13
M.T. Boyle · 1988 · 1.4K citations
Design rules for small low speed wind tunnels
Rabindra D. Mehta, P. Bradshaw · The Aeronautical Journal · 1979 · 398 citations
Choice Reviews Online · 2007 · 364 citations
Turbulence reduction by screens
Johan Groth, Arne V. Johansson · Journal of Fluid Mechanics · 1988 · 197 citations