Characteristics of Ammonia/Hydrogen Premixed Combustion in a Novel Linear Engine Generator

Abstract

In order to support the development of a novel linear engine generator (LEG), the characteristics of ammonia/hydrogen premixed combustion are studied by using a detailed chemical kinetics mechanism. The ammonia combustion mechanism is identified among several mechanisms and validated with published experimental data. A parametric analysis is carried out under LEG typical working conditions to study the effects of equivalence ratio (0.80–1.60), hydrogen blending ratio (0.0–0.6), initial temperature (300–700 K) and initial pressure (1–20 bar) on premixed laminar flame speed, ignition delay and key flame species concentrations. It is shown that an equivalence ratio of around 1.10–1.20 is beneficial to both ammonia flame stability and lower NOx emission. Ignition delay is reduced with the increase in hydrogen blending ratio, initial temperature and initial pressure. At a certain initial temperature and initial pressure, the effects of hydrogen blending ratio can be negligible for over 50% hydrogen in the fuel. Under higher pressure (>10 bar), the initial pressure has a minor influence on the ignition delay reduction. It is also found that the high-pressure high-temperature environment contributes to reducing NO emission considerably in ammonia/hydrogen combustion, which implies the potential of a low NOx LEG fuelled by ammonia/hydrogen.