International Journal of Engine Research · 2020 · 12 citations · 54 references
EngineeringAutomotive EngineeringMechanical EngineeringCombustionInternal Combustion EnginesPowertrain EngineeringCombustion ProcessesCompression-ignition EnginesEngine DesignEngine EmissionsEngine PerformanceEngine Performance CharacteristicsCombustion CharacteristicsDiesel EnginesDiesel Fuel InjectionEmissions FormationFuel Injection TimingIgnition DelayInjection TimingSpecific Fuel Consumption
The present paper aims to assess the impacts of diesel injection timing and two bowl geometries including re-entrant and wide-shallow combustion chambers on the combustion characteristics, emissions formation, and fuel consumption in a reactivity controlled compression ignition diesel engine under low and high load (five and nine bar indicating mean effective pressure) conditions. The results revealed that diesel injection at −60 CA ATDC under low load conditions significantly decreased soot and NOx emissions simultaneously for both piston bowl geometries. The use of the wide-shallow chamber decreased the period of the ignition delay and increased the engine operable load range as a result of more stable combustion under high-load conditions compared to the re-entrant chamber. Moreover, at all diesel injection timings, the indicated specific fuel consumption was decreased by nearly 4.8 and 6.6% under low and high load conditions, respectively when the wide-shallow combustion chamber was used since the heat transfer loss was lower than that of the re-entrant chamber. However, NOx emission under high load conditions at the center of the combustion chamber and more soot emission in the exhaust gas are two disadvantages of the wide-shallow chamber versus the re-entrant combustion chamber.
54
Sage Kokjohn, Reed Hanson, Derek Splitter et al. · International Journal of Engine Research · 2011 · 894 citations · Full text
Engineering, Automotive Engineering, Mechanical Engineering +17
P. K. Senecal, Eric Pomraning, K. J. Richards et al. · SAE technical papers on CD-ROM/SAE technical paper series · 2003 · 756 citations
Engineering, Chemical Engineering, Mechanical Engineering +17