Electrohydrodynamic Jet Printing of One‐Dimensional Photonic Crystals: Part I—An Empirical Model for Multi‐Material Multi‐Layer Fabrication

Abstract

Abstract Electrohydrodynamic jet (e‐jet) printing is a high‐resolution additive manufacturing technique that holds promise for the fabrication of customized micro‐devices. In this companion paper set, e‐jet printing is investigated for its capability in depositing multilayer thin‐films with microscale spatial resolution and nanoscale thickness resolution to create arrays of 1D photonic crystals (1DPC). In this paper, an empirical model for the deposition process is developed, relating process and material parameters to the thickness and uniformity of the patterns. Standard macroscale measurements of solid surface energy and liquid surface tension are used in conjunction with microscale contact angle measurements to understand the length scale dependence of material properties and their impact on droplet merger into uniform microscale thin‐films. The model is validated with several photopolymer inks, a subset of which is used to create pixelated, multilayer arrays of 1DPCs with uniformity and resolution approaching standards in the optics manufacturing industry. It is found that the printed film topography at the microscale can be predicted based on the surface energetics at the microscale. Due to the flexibility in design provided by the e‐jet process, these findings can be generalized for fabricating additional multimaterial, multilayer micro‐ and nanostructures with applications beyond the field of optics.