HardwareX · 2020 · 63 citations · 71 references
Health ProfessionsEmergency MedicineRespiratory TherapyPulmonologyResuscitationVentilationCardiopulmonary ResuscitationLung-protective VentilationMechanical VentilationMechanical Ventilation ModesPositive End-expiratory PressureVentilator ModesBag-valve MasksCompressionPortable Ventilator TechnologyPositive Pressure Ventilation DevicesRespiratory Mechanics MeasurementRespiratory RateRespiratory Rate MonitoringRespiratory Rate Regulation
This study describes the development of a simple and easy-to-build portable automated bag valve mask (BVM) compression system, which, during acute shortages and supply chain disruptions can serve as a temporary emergency ventilator. The resuscitation system is based on the Arduino controller with a real-time operating system installed on a largely RepRap 3-D printable parametric component-based structure. The cost of the materials for the system is under $170, which makes it affordable for replication by makers around the world. The device provides a controlled breathing mode with tidal volumes from 100 to 800 mL, breathing rates from 5 to 40 breaths/minute, and inspiratory-to-expiratory ratio from 1:1 to 1:4. The system is designed for reliability and scalability of measurement circuits through the use of the serial peripheral interface and has the ability to connect additional hardware due to the object-oriented algorithmic approach. Experimental results after testing on an artificial lung for peak inspiratory pressure (PIP), respiratory rate (RR), positive end-expiratory pressure (PEEP), tidal volume, proximal pressure, and lung pressure demonstrate repeatability and accuracy exceeding human capabilities in BVM-based manual ventilation. Future work is necessary to further develop and test the system to make it acceptable for deployment outside of emergencies such as with COVID-19 pandemic in clinical environments, however, the nature of the design is such that desired features are relatively easy to add using protocols and parametric design files provided.
71
Medical Applications for 3D Printing: Current and Projected Uses.
C Lee Ventola · PubMed · 2014 · 927 citations
Laurent Brochard, Françoise Roudot‐Thoraval, É. Roupie et al. · American Journal of Respiratory and Critical Care Medicine · 1998 · 807 citations
RepRap – the replicating rapid prototyper
Rhys Jones, P. Haufe, Edward Sells et al. · Robotica · 2011 · 769 citations · Full text