Applied Physics Letters · 2020 · 18 citations · 48 references
Natural SciencesElectrical EngineeringMaterials ScienceElectronic MaterialsPolymer ChemistrySemiconductor DevicesConducting PolymersConductive PolymersHigh-performance PolymersOrganic Electronic MaterialsOrganic SemiconductorsPolymer Thin FilmsCarrier MobilityCharge Carrier MobilityDevice FabricationElectron MobilityGlass TransitionGlass Transition TemperatureOrganic ElectronicsThermal Properties
Organic field-effect transistors (OFETs) have attracted great attention as key elements in Internet-of-Thing (IoT) devices due to their advantages of low cost and mass producibility made possible by printing technology. Such devices require organic semiconductors (OSCs) that intrinsically possess high carrier mobility and air stability. In addition, the demand for low-voltage operation and low power consumption has been increasing because the potential power sources for actual devices are implementable energy harvesters that supply low power and low voltages. Based on recently developed high-performance single-crystal p-type and n-type OSCs, this work demonstrated air-stable, high-mobility OFETs with low-voltage operation by using an insulating polymer-blend printing method. By comparing two acrylic polymers poly(methyl methacrylate) and poly(adamantyl methacrylate) (PADMA), having remarkably different thermal properties, we found that PADMA showing a high glass transition temperature >200 °C was suitable for device fabrication, enhancing the flexibility of OSC materials. Also, PADMA spontaneously produced good charge-transport interfaces with the OSC single crystals, leading to high carrier mobilities of 6.6 and 2.2 cm2 V−1 s−1 in p-channel and n-channel OFETs at ≤1.5 V, respectively. The current electron mobility was the highest among low voltage-operation OFETs reported so far. These high-mobility OFETs were integrated into a complementary inverter, for which a low static power consumption of 6.6 pW was confirmed. Therefore, this study reports an advantage of polymer-blend printing for OFETs with enhanced processability and performance suitable for IoT applications.
48
An ultra-lightweight design for imperceptible plastic electronics
Martin Kaltenbrunner, Tsuyoshi Sekitani, Jonathan T. Reeder et al. · Nature · 2013 · 2.5K citations
Natural Sciences, Materials Engineering, Materials Science +12
Inkjet printing of single-crystal films
Hiromi Minemawari, Toshikazu Yamada, Hiroyuki Matsui et al. · Nature · 2011 · 1.7K citations
Natural Sciences, Materials Engineering, Materials Science +8
Ultralow-power organic complementary circuits
Hagen Klauk, Ute Zschieschang, Jens Pflaum et al. · Nature · 2007 · 1.4K citations
Low-voltage organic transistors with an amorphous molecular gate dielectric
Marcus Halik, Hagen Klauk, Ute Zschieschang et al. · Nature · 2004 · 780 citations
Natural Sciences, Electrical Engineering, Materials Science +14