Effect of PTFE on characteristics, corrosion, and tribological behavior of Zn–Ni electrodeposits

Abstract

Abstract Zn–Ni and Zn–Ni/PTFE coatings were produced by the electrodeposition technique. The effect of PTFE particles concentration on co-deposition of these particles was investigated. Morphology of Zn–Ni and Zn–Ni/PTFE coatings along with their corrosion and tribological behavior were studied. The results showed that maximum incorporation of PTFE particles was obtained in the presence of 30 g l −1 of these particles in the bath. Clusters of cauliflower-like morphology of Zn–Ni film became coarser by the incorporation of PTFE particles. Potentiodynamic polarization and electrochemical impedance spectroscopy results revealed that Zn-14Ni film had the best corrosion resistance between all the samples. The corrosion resistance of the alloy film was decreased by the incorporation of PTFE particles. However, Zn–Ni/PTFE film had higher corrosion resistance than the steel substrate. According to hardness and wear results, while Zn-14Ni film had the highest hardness between all the samples, Zn–Ni/PTFE film had the lowest volume loss and friction coefficient.