Catalysts · 2020 · 19 citations · 42 references
Natural SciencesChemical EngineeringChemistryCatalysisReaction EngineeringWaste ManagementCatalyst DesignCatalytic Reaction EngineeringIndustrial Catalytic ProcessesSulfur CompoundsSulfur DioxideSulfur OxidesFeedstock CharacterizationOxidative DesulfurizationRemoval EfficiencySulfur Dioxide RemovalSulfur Oxide RemovalSulfur Oxides RemovalSulfur RemovalTaguchi Designs
Heavy fuel oils contain a high amount of sulfur. In this work, an extent amount of sulfur content waste tire pyrolysis oil (WTPO) was used as a fuel feedstock. A promising alternative oxidative desulfurization (ODS) method was applied in sulfur removal from WTPO using a S-ZrO2/SBA-15 solid acid catalyst, hydrogen peroxide (H2O2) as an oxidant and acetonitrile as an extracting solvent at varied conditions. The prepared catalyst was characterized by X-ray diffraction (XRD), Bruanuer-Emmet-Teller (BET) method and Fourier transform infrared spectroscopy (FTIR) analysis. The influence of reaction parameters such as reaction time (30-60 min), catalyst loading (0.5–1.5 wt.%), oxidant to oil mole ratio (5–15) at fixed reaction temperature 70 °C on desulfurization of WTPO were investigated. Taguchi method was selected to design the experiment for optimizing the reaction parameters by maximizing the sulfur removal efficiency. The maximum desulfurization efficiency 59.49% was obtained under optimum conditions reaction time (60 min), catalyst loading (1.0 wt.%) and oxidant to sulfur mole ratio (10:1). A catalytic S-ZrO2/SBA-15 -H2O2 oxidation system for oxidative desulfurization of waste tire pyrolysis oil using at mild reaction conditions was developed.
42
Oxidative Desulfurization of Hydrocarbon Fuels
S. A. Yashnik, Valentin N. Parmon, Abdennour Bourane et al. · Catalysis Reviews · 2011 · 242 citations