Scientific Reports · 2020 · 142 citations · 52 references
Natural SciencesMaterials EngineeringMaterials ScienceCrystal StructureMaterials CharacterizationMetallurgyDislocation MechanicsNeutron DiffractionStacking FaultsStainless SteelsSteel MaterialsDiffraction Signatures Of Stacking FaultsEnergy DepositionHigh-entropy AlloysStacking Fault EnergySubstructure FormationTwinningTwinning AnalysisTwinning Deformation
Abstract Stacking fault energies (SFE) were determined in additively manufactured (AM) stainless steel (SS 316 L) and equiatomic CrCoNi medium-entropy alloys. AM specimens were fabricated via directed energy deposition and tensile loaded at room temperature. In situ neutron diffraction was performed to obtain a number of faulting-embedded diffraction peaks simultaneously from a set of (hkl) grains during deformation. The peak profiles diffracted from imperfect crystal structures were analyzed to correlate stacking fault probabilities and mean-square lattice strains to the SFE. The result shows that averaged SFEs are 32.8 mJ/m 2 for the AM SS 316 L and 15.1 mJ/m 2 for the AM CrCoNi alloys. Meanwhile, during deformation, the SFE varies from 46 to 21 mJ/m 2 (AM SS 316 L) and 24 to 11 mJ/m 2 (AM CrCoNi) from initial to stabilized stages, respectively. The transient SFEs are attributed to the deformation activity changes from dislocation slip to twinning as straining. The twinning deformation substructure and atomic stacking faults were confirmed by electron backscatter diffraction (EBSD) and transmission electron microscopy (TEM). The significant variance of the SFE suggests the critical twinning stress as 830 ± 25 MPa for the AM SS 316 L and 790 ± 40 MPa for AM CrCoNi, respectively.
52
Ultrastructural Characterization of the Lower Motor System in a Mouse Model of Krabbe Disease
Valentina Cappello, Laura Marchetti, Paola Parlanti et al. · Scientific Reports · 2016 · 13.3K citations · Full text
Medicine, Neurobiology, Neuroscience +17
A fracture-resistant high-entropy alloy for cryogenic applications
Bernd Gludovatz, Anton Hohenwarter, D. Catoor et al. · Science · 2014 · 5.6K citations
Natural Sciences, Materials Engineering, Materials Science +12
Additive manufacturing of metals
Dirk Herzog, Vanessa Seyda, Eric Wycisk et al. · Acta Materialia · 2016 · 4.6K citations · Full text
Engineering, Manufacturing Engineering, Materials Engineering +12