Oxidized demethylated lignin as a bio-based adhesive for wood bonding

Abstract

Lignin was successfully modified to prepare a bio-based wood adhesive by just two synthesis steps: demethylation and periodate oxidation. Fourier Transform Infrared Spectroscopy (FT-IR), Matrix Assisted Laser Desorption Ionization Time of Flight (MALDI-TOF) Mass Spectrometry and Thermomechanical Analysis (TMA) were combined to characterize the bio-based adhesives obtained. Furthermore, the adhesion performance of the bio-based lignin adhesive was measured by testing the tensile shear strength of the bonded joints. The results show that demethylated lignin gives to the wood joint acceptable dry shear strength, but no wet shear strength. Thus, sodium peroxide (NaIO4) oxidant was used to improve the bonding performance of lignin-based adhesives. The optimal formulation for oxidized demethylated lignin adhesives was found to be by 20% addition of NaIO4. The adhesive presented is a lignin-derived non- aldehyde addition, high biomass content, and its preparation is convenient, low-cost product and can be applied to wood bonding.