Energy & Fuels · 2020 · 62 citations · 41 references
EngineeringChemical EngineeringChemistryCatalysisHeat TransferReaction EngineeringCatalytic Reaction EngineeringEnergy ConversionFuel ChemistryAromatic HydrocarbonsBimolecular ReactionsCoke FormationPolycyclic Aromatic HydrocarbonsPyrolysisRegenerative CoolingSupercritical FluidsThermal Conversion
JP-10 is a potential endothermic hydrocarbon fuel (EHF) with a high energy density for the regenerative cooling technology of advanced aircrafts. In this work, pyrolysis and coking of JP-10 were experimentally studied using an electrically heated tube as a flowing reactor under supercritical conditions (4.5 MPa, 550–735 °C). For the supercritical pyrolysis, dicyclopentadiene, exo-TCD4e, and indane/indene were observed with relatively higher selectivity at low conversion, and the selectivities of typical products (ethene, propene, CPD, cyclopentene, and benzene) were lower compared with that under atmospheric pressure, possibly because of the enhanced bimolecular reactions. The heat sink of JP-10 was approximately 2.5 MJ/kg ascribed to the severe coke formation during the pyrolysis. Further characterizations on cokes indicated that the coke in the bulk fluid was about 70–170 times higher than that deposited on the wall, attributed to rapid formation of polycyclic aromatic hydrocarbons (PAHs) of pyrolysis products rather than the wall catalysis.
41
Recent Developments in High-Energy Density Liquid Hydrocarbon Fuels
Hanshik Chung, C. S. H. Chen, Robert Kremer et al. · Energy & Fuels · 1999 · 300 citations
Engineering, Aerospace Engineering, Chemical Engineering +12