Journal of Semiconductors · 2020 · 10 citations · 6 references
EngineeringElectrical EngineeringMaterials ScienceOptoelectronicsPhotonicsSemiconductor DevicesDevice ReliabilityLaser DiodesOptoelectronic DevicesSemiconductor Device MaterialsSemiconductor LasersSemiconductor ReliabilityContinuous-wave LasersHigh-power Laser DiodesMaximum OutputMaximum Power OutputPower OutputPretreatmentQuantum Well Laser DiodesSemiconductor Laser Diodes
Abstract A very highly efficient InGaAlAs/AlGaAs quantum-well structure was designed for 808 nm emission, and laser diode chips 390- μ m-wide aperture and 2-mm-long cavity length were fabricated. Special pretreatment and passivation for the chip facets were performed to achieve improved reliability performance. The laser chips were p-side-down mounted on the AlN sub-mount, and then tested at continuous wave (CW) operation with the heat-sink temperature setting to 25 °C using a thermoelectric cooler (TEC). As high as 60.5% of the wall-plug efficiency (WPE) was achieved at the injection current of 11 A. The maximum output power of 30.1 W was obtained at 29.5 A when the TEC temperature was set to 12 °C. Accelerated life-time test showed that the laser diodes had lifetimes of over 62 111 h operating at rated power of 10 W.
6
Britta Leonhäuser, H. Kissel, Andreas Unger et al. · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · 2014 · 31 citations
J. Van de Casteele, M. Bettiati, François Laruelle et al. · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · 2008 · 23 citations
Imaging Catastrophic Optical Mirror Damage in High-Power Diode Lasers
Mathias Ziegler, Jens W. Tomm, U. Zeimer et al. · Journal of Electronic Materials · 2010 · 15 citations