Surface Engineering · 2019 · 28 citations · 25 references
EngineeringMaterials EngineeringMaterials ScienceInterface ScienceSurface EngineeringSurface ScienceCoating TechnologyCoatingsNucleationSurface CoatingsSurface HydrophobicitySurface ModificationFreezingFreezing Onset TemperatureHeterogeneous Ice NucleationHeterogeneous NucleationSuperhydrophobic CoatingsSuperhydrophobic SurfacesSuperhydrophobicityWater Contact Angle
To investigate the effect of heterogeneous nucleation sites on the anti-icing performance of superhydrophobic surfaces, the superhydrophobic POSS/PDMS coatings were prepared and covered by PVA through spraying coating method. The surface morphology was characterized by SEM, and the anti-icing performance of surfaces was characterized through contact angle, freezing temperature of surface water droplet and ice adhesion. The results show that with the optimum match of the particle distance and PVA spraying times, the PVA-POSS/PDMS coating has better anti-icing performance than superhydrophobic POSS/PDMS coating: the freezing temperature of droplet on PVA-POSS/PDMS coating surface is −22.55°C, approximately 2°C lower than POSS/PDMS coating surface. This work confirms the adverse effect of heterogeneous nucleation sites and successfully improves the anti-icing performance of superhydrophobic surface by covering the heterogeneous nucleation sites with nucleation inhibitor. The synergism of nucleation inhibitor and the micro-nano structures is proposed, which will be conducive to the design of high-performance anti-icing materials.
25
Janus effect of antifreeze proteins on ice nucleation
Kai Liu, Chunlei Wang, Ji Ma et al. · Proceedings of the National Academy of Sciences · 2016 · 306 citations · Full text
Stress-localized durable icephobic surfaces
Peyman Irajizad, Abdullah Al-Bayati, Bahareh Eslami et al. · Materials Horizons · 2019 · 194 citations