New Method for Evaluating Surface Roughness Parameters Acquired by Laser Scanning

Leandro Tonietto, Luiz Gonzaga, Maurício Roberto Veronez, Cláudio de Souza Kazmierczak, Daiana Cristina Metz Arnold, Cristiano André da Costa

Scientific Reports · 2019 · 75 citations · 27 references

DOIFull text

Open access

Concepts

TL;DR

Surface roughness evaluation is essential for material quality, yet civil engineering relies on 2D mechanical profilometers or 3D laser profilometers with no consensus on quantitative interpretation. This work proposes a new method to evaluate surface roughness. The method generates a visual roughness signature by computing roughness parameters in hierarchically organized regions. The method yields a local, more accurate evaluation and quantitatively distinguishes ceramic blocks by revealing the largest variations in roughness parameters such as Ra_avg, Ra_sdv, Ra_min, and Ra_max.

Abstract

Abstract Quality evaluation of a material’s surface is performed through roughness analysis of surface samples. Several techniques have been presented to achieve this goal, including geometrical analysis and surface roughness analysis. Geometric analysis allows a visual and subjective evaluation of roughness (a qualitative assessment), whereas computation of the roughness parameters is a quantitative assessment and allows a standardized analysis of the surfaces. In civil engineering, the process is performed with mechanical profilometer equipment (2D) without adequate accuracy and laser profilometer (3D) with no consensus on how to interpret the result quantitatively. This work proposes a new method to evaluate surface roughness, starting from the generation of a visual surface roughness signature, which is calculated through the roughness parameters computed in hierarchically organized regions. The evaluation tools presented in this new method provide a local and more accurate evaluation of the computed coefficients. In the tests performed it was possible to quantitatively analyze roughness differences between ceramic blocks and to find that a quantitative microscale analysis allows to identify the largest variation of roughness parameters R a avg , R a sdv , R a min and R a max between samples, which benefit the evaluation and comparison of the sampled surfaces.

References

27