1990 · 28 citations · 0 references
EngineeringChemical EngineeringCombustionFluid DynamicsReaction EngineeringCombustion ProcessesFlame PropagationPremixed CombustionTurbulenceTurbulent CombustionTurbulent FlowFlame Front PropagationFlame SpeedPremixed Flame PropagationReynolds NumberTurbulence StructureTurbulent Flame SpeedTurbulent Flame StructureTurbulent Premixed Flames
Conceptual models of turbulent premixed flame propagation speeds for the three combustion regimes have been proposed and tested by comparing to the available well-defined data obtained on a variety of experimental rigs. The model for the wrinkled flame regime has been based on the Tennekes and Kuo-Corrsin concept of isotropic turbulence which proposes that dissipative eddies are most probably consist of vortex tubes with a diameter of the order of Kolmogorow scale and a spacing of the order of the Taylor length scale. Using this concept of turbulence structure, it was shown that the normalized turbulent flame propagation speed, ut/ul, is proportional to the square root of the normalized turbulence intensity, u′/ul and the turbulent Reynolds number based on Kolmogorov length scale. Rn. In the intermediate regime, assuming that the effective flame front surface area grows exponentially with the turbulence intensity, ut/ul. is linearly dependent on Rν and exponentially dependent on the square root of u′/ul. In the distributed reaction zones regime, starting with the Damkohler's formulation, dimensionless numbers contributing to the flame propagation have been selected, and it was found that ut/u′ is proportional to the 3/4th power of ul/u′. Comparison of the predictions of the models and the experimental data from a variety of rigs shows excellent agreement despite the uncertainties involved in the measurement of the turbulence parameters and propagation velocities.