ACS Applied Energy Materials · 2019 · 26 citations · 33 references
EngineeringMaterials EngineeringMaterials ScienceElectronic MaterialsSemiconductor DevicesSemiconductor MaterialsPhotovoltaic DevicesPhotovoltaic MaterialsSemiconductor Device MaterialsSolar Cell MaterialsSolar CellsThin-film MaterialsEnergy Conversion EfficiencyLaser PatterningMagnetron SputteringPerovskite Solar CellsPower ConversionPower Conversion EfficiencySilicon Solar CellsTandem Solar Cells
Radio frequency (RF) magnetron-sputtered TiO2 (RS-TiO2) is investigated as a hole-blocking layer for perovskite solar cells. RS-TiO2 shows conformal, dense, and efficiently electron transferable properties. Power conversion efficiency (PCEs) of 20.9% were obtained with high reproducibility. RS-TiO2 also showed potential in the up-scaling process, transparent perovskite, and perovskite/silicon 4-terminal tandem solar cells. With increasing active area 40 times from 0.075 cm2 to 3 cm2 without dividing areas by laser patterning, less than 4% open-circuit voltage (Voc) and short-circuit current density (Jsc) drops were observed. This means RS-TiO2 layers can maintain their film quality even when the area size is increased. Furthermore, by applying RS-TiO2 to transparent perovskite solar cells and perovskite/silicon 4-terminal tandem solar cells, PCEs of 16.7% and 23.1% were obtained, respectively.
33
The emergence of perovskite solar cells
Martin A. Green, Anita Ho‐Baillie, Henry J. Snaith · Nature Photonics · 2014 · 7.3K citations
Compositional engineering of perovskite materials for high-performance solar cells
Nam Joong Jeon, Jun Hong Noh, Woon Seok Yang et al. · Nature · 2015 · 6.4K citations
Natural Sciences, Materials Engineering, Materials Science +14