IET Microwaves Antennas & Propagation · 2019 · 19 citations · 12 references
EngineeringElectrical EngineeringCircuit TheoryMicroelectronicsMicrowave EngineeringMicrostrip CircuitsMicrowave FiltersMicrowave Integrated CircuitsMicrowave ResonatorsPower DividersRadio-frequency Integrated CircuitsCompact Power DividersDefected Ground StructuresInsertion LossMicrostrip Low-pass FiltersMicrostrip Power DividersMicrostrip Wilkinson Power DividersPower DivisionWilkinson Power Divider
A compact, low‐cost Wilkinson power divider (WPD) of 1.3 GHz ( f 0 ) operating frequency, with a low‐pass filtering response, is presented in this study. Power division and low‐pass filtering responses are both achieved by using two symmetrical units of interdigital line resonators (ILRs). Each square unit of ILR exhibits a low‐pass filtering response, with a minimum insertion loss of 0.3 dB. The dumbbell‐shaped, defected ground structures are introduced for widening the attenuation band by suppressing the harmonics up to 14 GHz (up to 10.76 f 0 ) and also for miniaturising the circuit. An isolation resistor of 100 Ω is placed between two output ports of the WPD for obtaining good isolation. The operating frequency of the low‐pass filter is 2 GHz with an attenuation of −17 dB up to 20 GHz. The proposed structure is fabricated using low‐cost substrate material FR4. Both the low‐pass filter and the power divider are fabricated and measured. The electromagnetic‐simulated and measurement results are experimentally verified.
12
Rashid Mirzavand, Mohammad Mahdi Honari, Abdolali Abdipour et al. · IEEE Transactions on Microwave Theory and Techniques · 2012 · 131 citations