Journal of Materials Research and Technology · 2019 · 11 citations · 42 references
Natural SciencesMaterials EngineeringMaterials ScienceMetallurgyNanomaterialsStructural MaterialsAlloysMetalsMicrostructure ControlPowder MetallurgyPowder ProcessingSinteringAlloyingBeta Titanium AlloysLow-energy MaterialsMechanical AlloyingMillingNanostructured Titanium AlloysPowder Metallurgy ProcessingTitanium Alloys
An original (beta + gamma)-TiNbTa material was manufactured by an optimised powder metallurgy treatment, based on a mechanical alloying (MA) synthesis, carried out at low energy, and a subsequently field assisted consolidation technique, the pulsed electric current sintering (PECS). The successful development of this (beta + gamma)-TiNbTa material was possible by the optimisation of the milling time (60 h) for the MA synthesis and the load and sintering temperature for the PECS (30 MPa and 1500 °C), as key parameters. Furthermore, the selected heating and cooling rates were 500 °C min−1 and free cooling, respectively, to help maintain the lowest particle size and to avoid the formation of a detrimental high stiffness, hexagonal (alpha)-Ti alloy. All these optimised experimental conditions enabled the production of a full densified (beta + gamma)-TiNbTa material, with partially nanostructured areas and two TiNbTa alloys, with a body centred cubic (beta) and a novel face-centred cubic (gamma) structures. The interesting microstructural characteristics gives the material high hardness and mechanical strength that, together with the known low elastic modulus for the beta-Ti alloys, makes them suitable for their use as potential biomaterials for bone replacement implants.
42
X-ray line broadening from filed aluminium and wolfram
G.K. Williamson, W H Hall · Acta Metallurgica · 1953 · 10.2K citations
The Scherrer Formula for X-Ray Particle Size Determination
A. L. Patterson · Physical Review · 1939 · 8.9K citations
Mechanical alloying and milling
C. Suryanarayana · Progress in Materials Science · 2001 · 7.9K citations
Engineering, Manufacturing Engineering, Materials Science +12
Hall–Petch relation and boundary strengthening
Niels Hansen · Scripta Materialia · 2004 · 3.6K citations