Improving the performance of oil based mud and water based mud in a high temperature hole using nanosilica nanoparticles

Allan Katende, Natalie Vanessa Boyou, Issham Ismail, Derek Z. Chung, Farad Sagala, Norhafizuddin Hussein, Muhamad S. Ismail

Colloids and Surfaces A Physicochemical and Engineering Aspects · 2019 · 171 citations · 71 references

DOIFull text

Open access

Concepts

TL;DR

Oil‑based and water‑based muds are preferred drilling fluids, but their performance deteriorates at high temperatures because of chemical instability. The study evaluates nanosilica as a fluid‑loss reducer and rheology enhancer for OBM and WBM under high‑temperature conditions. The authors tested OBM and WBM with 0.5–1.5 ppb nanosilica at 9 or 12 ppg mud weights and aging temperatures up to 300 °F, measuring rheology, lubricity, electrical stability, HPHT filtration, and fitting rheological models to compare enhanced and base muds. Nanosilica significantly improves the rheological properties of both OBM and WBM.

Abstract

Oil-based mud (OBM), a non-Newtonian fluid, is known for its superior performance in drilling complex wells as well as combating potential drilling complications. However, the good performance may degrade under certain circumstances especially because of the impact of chemical instability at an elevated temperature. The same phenomenon occurs for water-based mud (WBM) when it is used in drilling under high temperature conditions. To prevent this degradation from occurring, numerous studies on utilizing nanoparticles to formulate smart fluids for drilling operations are being conducted worldwide. Hence, this study aims to evaluate the performance of nanosilica (NS) as a fluid loss reducer and a rheological property improver in both OBM and WBM systems at high temperature conditions. This study focuses on the impacts of different nanosilica concentrations, varying from 0.5 ppb to 1.5 ppb, and different mud weights of 9 ppg and 12 pg as well as different aging temperatures, ranging from ambient temperature to 300 °F, on the rheological performance of OBM and WBM. All the rheological properties are measured at ambient temperature, and additionally tests, including lubricity, electrical stability, and high-pressure high-temperature filtration measurements, are conducted, and rheological models are obtained. The performance of nanosilica is then studied by comparing each of the nanosilica-enhanced mud systems with the corresponding basic mud system, taking the fluid loss and rheological properties as the benchmark parameters. Nanosilica shows a positive impact on OBM and WBM, as the presence of nanosilica in the mud systems can effectively improve almost all their rheological properties.

References

71