Design, Modeling and Analysis of Perforated RF MEMS Capacitive Shunt Switch

K. Srinivasa Rao, Ch. Gopi Chand, K. Girija Sravani, D. Prathyusha, P. Naveena, G. Sai Lakshmi, P. Ashok Kumar, T. Lakshmi Narayana

IEEE Access · 2019 · 28 citations · 32 references

DOIFull text

Open access

Concepts

Abstract

This paper illustrates the design, modeling, and analysis of bridge type structure based capacitive RF MEMS switch with different beam thickness and materials. We have used Ashby’s approach to select the best materials in each and every level which helped to improve the overall performance of the switch in terms of mechanical, electrical, and RF properties. Silicon Nitride thin film ( <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\varepsilon _{\mathrm {r}}= 7.8$ </tex-math></inline-formula> ) is used as a dielectric material. The beam structure stiffness is analyzed with different materials, such as gold, titanium, and platinum, within these materials gold with high thermal conductivity and Euler–Young’s modulus of 77 GPa is offering the best performance. Incorporation of meanders and perforations to the membrane helped to reduce the pull-in voltage. The proposed switch is offering very low pull-in voltage of 1.9 V. The deflection of beam thickness is tabulated for the three materials among them the 2 <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\mu \text{m}$ </tex-math></inline-formula> thickness is best beam thickness for the switch for X-band applications. The switch offers best return loss (S <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">11</sub> ) of −21.36 dB, insertion loss (S <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">12</sub> ) of −0.147 dB, and isolation (S <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">21</sub> ) of −52.04 dB at 8GHz. The switch presented in this paper is preferable in X-band applications.

References

32