Journal of Micromechanics and Microengineering · 2019 · 24 citations · 38 references
EngineeringChemical EngineeringElectrical EngineeringElectrochemical EngineeringMicroelectromechanical SystemsMicrofabricationFuel Cell MembranesFuel CellsMems DesignDirect Methanol Fuel CellsMicrochannel DesignOpen-circuit VoltagePower DensityPower Density EnhancementPower OutputPower Output OptimizationSilicon Microchannels
Abstract This work presents design, fabrication and optimization of methanol concentration and flow channel cross-sectional geometry for enhanced power output in passive micro-direct methanol fuel cells. Passive micro-direct methanol fuel cells are fabricated with flow channels in silicon having both rectangular and trapezoidal cross-sectional geometry for flow of methanol at anode and air at cathode using microelectromechanical systems (MEMS) fabrication technique. The experiments are conducted at 25 °C by feeding methanol with a flow rate of 25 μ l min −1 and supply of air at cathode by air-breathing method. Results show a peak in open circuit voltage and power density at 7 M methanol concentration for passive micro-direct methanol fuel cells having both rectangular and trapezoidal cross-sectional geometry. A study of influence of silicon flow channel cross-sectional geometry on passive micro-direct methanol fuel cell performance shows for the first time that the flow channels with trapezoidal cross-section enhance the power density (6.64 mW cm −2 ) nearly by a factor of two compared to that of flow channels with rectangular cross-section (3.9 mW cm −2 ) at 7 M methanol concentration. We believe that, though our results of significant enhancement of power density with trapezoidal fuel flow channels are obtained with micro-direct methanol fuel cells as a platform, they should also be applicable to other proton exchange membrane fuel cells with ethanol or humidified hydrogen as fuel.
38
DMFCs: From Fundamental Aspects to Technology Development
A.S. Aricò, S. Srinivasan, V. Antonucci · Fuel Cells · 2001 · 1.4K citations
Natural Sciences, Chemical Engineering, Materials Science +17
Fuel cells for portable applications
C.K. Dyer · Journal of Power Sources · 2002 · 706 citations
Engineering, Chemical Engineering, Electrical Engineering +14
Advances in direct oxidation methanol fuel cells
S. Surampudi, S. R. Narayanan, E. Vamos et al. · Journal of Power Sources · 1994 · 307 citations · Full text