Nigerian Journal of Technology · 2019 · 16 citations · 8 references
EngineeringManufacturing EngineeringMaterials EngineeringMaterials ProcessingMetallurgyProduction EngineeringMachiningOilseed ProcessingFeed Rate ControlFeedrate OptimizationMachining ProcessesMachining TechnologyOil ProcessingSurface Roughness OptimizationSurface Roughness Parameters
Properties of melon seed and beniseed oils which are considered as “environmentally” friendly oils were investigated and the performance evaluation of the formulated beniseed and melon seed oil- based cutting fluids were carried out. American Iron and Steel Institute (AISI) 304L alloy steel was used as workpiece and tungsten carbide as cutting tool, while commercial mineral oil- based cutting fluid was used as a control experiment. The viscosities of the melon seed oil and beniseed oil- based cutting fluids were 1.53 mm2/s and 0.86mm2/s, while their pH values were 8.2 and 8.7 respectively. The optimal multi-response turning parameters was achieved using cutting speed of 159 rev/min (level 3), feed rate of 0.9 mm/rev (level 3), depth of cut of 1 mm (level 2) and type of cutting fluid of 1.53mm/s (level 3). The ANOVA results show that feed rate has the most significant effect on the surface roughness (92.93%) and cutting temperature (27.51%).Keywords: Cutting fluids; Surface roughness; Temperature; Cutting tool
8
Dry Machining and Minimum Quantity Lubrication
Klaus Weinert, Ichiro INASAKI, John W. Sutherland et al. · CIRP Annals · 2004 · 915 citations
Engineering, Manufacturing Engineering, Mechanical Engineering +14
Fats and Oils as Oleochemical Raw Materials.
Karlheinz Hill · Journal of Oleo Science · 2001 · 274 citations · Full text
Agriculture, Chemistry, Food Science +14
Sunday Albert Lawal, Imtiaz Ahmed Choudhury, Yussof Nukman · Journal of Cleaner Production · 2013 · 124 citations
Engineering, Manufacturing Engineering, Materials Engineering +7