Journal of Environmental Engineering · 2019 · 31 citations · 69 references
EngineeringChemical EngineeringEnvironmental EngineeringElectrochemical EngineeringElectrochemistryWastewater TreatmentElectrochemical Cell DesignElectrochemical CellsElectrochemical KineticsElectrochemical ReactorsElectrode MaterialsNanotubes3D Electrode ReactorsConcentrationCurrent DensityElectrochemical RemediationEnergy ConsumptionMulti-walled Carbon NanotubesOrganic Pollutant DegradationPh Dependence
The removal of Reactive Black 5 (RB5) dye and chemical oxygen demand (COD) was investigated using a three-dimensional (3D) electrochemical (3DE) reactor with multiwalled carbon nanotubes (MWCNTs). The experiments were performed according to a Taguchi design model, with the variables being the solution pH (2–9), current density (10–25 mA/cm2), reaction time (15–60 min), MWCNT concentration (25–200 mg/L), and RB5 concentration (25–100 mg/L). The best conditions for optimum removal of RB5 and COD were pH 3, MWCNT concentration 200 mg/L, current density 15 mA/cm2, RB5 concentration 100 mg/L, and reaction time 60 min. Among the main factors, the solution pH for removal of COD and RB5 and the current density for energy consumption had the highest impact. The 3D system generated more H2O2 and OH radicals compared with a two-dimensional (2D) system because the MWCNTs act as microelectrodes in the optimal conditions. In the 3D process, the production of high levels of reactive species led to an increase in the degradation of RB5 into aromatic compounds and various acids.
69
Hadi Khani, Mohammad Kazem Rofouei, Pezhman Arab et al. · Journal of Hazardous Materials · 2010 · 726 citations
Chao Zhang, Minghua Zhou, Gengbo Ren et al. · Water Research · 2014 · 296 citations
Natural Sciences, Environmental Engineering, Environmental Sciences +17