Drones · 2019 · 64 citations · 28 references
EngineeringAerospace EngineeringGeoinformaticsDigital Elevation ModelingSurveyingUnmanned Aircraft SystemsPhotogrammetryTerrain MorphometryTopographic MappingTopographic ModelingTopographic ModelsTopographic SurveyingAerial 3D ModelingControl PointsDigital Elevation Model GenerationFlightPrecisionTopographic Mapping From ImagesUnmanned Aerial Vehicle PhotogrammetryUnmanned Aerial Vehicle Surveying
Small unmanned aerial systems (UASs) equipped with an optical camera are a cost-effective strategy for topographic surveys. These low-cost UASs can provide useful information for three-dimensional (3D) reconstruction even if they are equipped with a low-quality navigation system. To ensure the production of high-quality topographic models, careful consideration of the flight mode and proper distribution of ground control points are required. To this end, a commercial UAS was adopted to monitor a small earthen dam using different combinations of flight configurations and by adopting a variable number of ground control points (GCPs). The results highlight that optimization of both the choice and combination of flight plans can reduce the relative error of the 3D model to within two meters without the need to include GCPs. However, the use of GCPs greatly improved the quality of the topographic survey, reducing error to the order of a few centimeters. The combined use of images extracted from two flights, one with a camera mounted at nadir and the second with a 20° angle, was found to be beneficial for increasing the overall accuracy of the 3D model and especially the vertical precision.
28
On the Use of Unmanned Aerial Systems for Environmental Monitoring
Salvatore Manfreda, Matthew F. McCabe, Pauline E. Miller et al. · Remote Sensing · 2018 · 668 citations · Full text