2018 · 84 citations · 11 references
EngineeringComputer EngineeringElectrical EngineeringInternet Of ThingsLow-power DesignVlsi DesignEnergy-efficient Embedded SystemsI/o ArchitectureIot ArchitectureLow-power Digital Circuit DesignNear-threshold ComputingPower ManagementLow-power Embedded DesignLow-power Embedded SystemsLow-power Memory ArchitectureLow-power MicroarchitectureLow-power System DesignMemory ArchitectureMemory Array ArchitecturePower Density
The End-Nodes of the Internet of Things (IoT) require extreme energy efficiency coupled with wide power-performance operating range. Fully-depleted SOI (FD-SOI) is an attractive technology for ultra-low power and wide-range operation as it offers compelling options to tune power, performance, area (PPA) at design time as well as at run time. This paper describes Quentin: an MCU-class (32bit) open-source RISC-V SoC featuring an autonomous I/O subsystem optimized to deal with the wide variety of sensors available in IoT end-nodes, coupled with a processor optimized for near threshold computation and a heterogeneous (standard-cell and SRAM) memory architecture to better exploit the low-voltage capabilities of 22nm FDX technology. The system runs up to 2400 million equivalent RV32IMC instructions per second (MOPS) and achieves best power density of 6 μW/MHz, resulting into an energy efficiency of 433 MOPS/mW.
11
GAP-8: A RISC-V SoC for AI at the Edge of the IoT
Éric Flamand, Davide Rossi, Francesco Conti et al. · 2018 · 216 citations
The RISC-V Instruction Set Manual
Andrew Waterman, Yunsup Lee, David A. Patterson et al. · 2014 · 177 citations
PULP: A parallel ultra low power platform for next generation IoT applications
Davide Rossi, Francesco Conti, Andrea Marongiu et al. · 2015 · 117 citations · Full text