Publication | Open Access
Experimental Study on Power Frequency Breakdown Characteristics of C<sub>4</sub>F<sub>7</sub>N/CO<sub>2</sub> Gas Mixture Under Quasi-Homogeneous Electric Field
40
Citations
21
References
2019
Year
Electrical EngineeringChemical EngineeringEnvironmental ChemistryQuasi-homogeneous Electric FieldHigh Voltage EngineeringEngineeringExcellent Dielectric StrengthTime-dependent Dielectric BreakdownExperimental StudySulfur HexafluorideThermodynamicsPulse PowerChemistryDielectric StrengthElectrical Insulation
As a new environmental-friendly gas insulating medium, perfluoroisobutyronitrile (C <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">4</sub> F <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">7</sub> N) has been widely concerned in recent years due to its relatively low global warming potential and excellent dielectric strength, which has the potential to replace the most greenhouse gas, sulfur hexafluoride(SF <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">6</sub> ). However, there are a few systematic studies on the influence of gas pressure and mixing ratio on the dielectric strength of C <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">4</sub> F <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">7</sub> N/CO <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sub> gas mixture at present. In this paper, the power frequency breakdown characteristics of C <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">4</sub> F <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">7</sub> N/CO <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sub> gas mixture under different pressure and mixing ratio conditions were tested using the gas insulation performance test platform. The optimal mixing ratio and pressure range of C <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">4</sub> F <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">7</sub> N/CO <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sub> gas mixture for engineering application were also discussed. It is found that the breakdown voltages of C <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">4</sub> F <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">7</sub> N/CO <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sub> gas mixture show a saturated growth trend with gas pressure and mixing ratio. The breakdown voltage of the gas mixture with 10% C <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">4</sub> F <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">7</sub> N can reach 80% of pure SF <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">6</sub> under the same condition. The insulation performance of the gas mixture with 20% C <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">4</sub> F <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">7</sub> N can reach more than 95% of pure SF <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">6</sub> . Relevant results indicate that the gas mixture with 4%–12% C <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">4</sub> F <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">7</sub> N has the potential to be applied to high-voltage gas-insulated equipment.
| Year | Citations | |
|---|---|---|
Page 1
Page 1