Journal of Optical Technology · 2018 · 15 citations · 23 references
Natural SciencesMaterials EngineeringMaterials ScienceCeramic MaterialsCeramicsOptical MaterialsCompound SemiconductorsDefects In CeramicsLuminescent MaterialsOptical CeramicsOxide SemiconductorsScintillator MaterialsCarrier ConcentrationCeramic ScintillatorsHot PressingLuminescent CeramicsOxide CeramicsScintillating CeramicsScintillation MaterialsZinc Oxides
This paper discusses the characteristics of ZnO and ZnO:Ga ceramics fabricated by uniaxial hot pressing. The short-wavelength transmission limit of zinc oxide ceramics is in the 370-nm region; the long-wavelength limit is determined by the free-charge-carrier concentration and lies in the interval from 5 to 9 μm. The total transmittance of such ceramics in the visible and near-IR regions is about 70% when the sample is 0.5 mm thick. The luminescence spectrum is represented by a broad emission band with maximum at 580 nm, having a defect nature. The introduction of 0.03–0.1 mass % gallium into the zinc oxide structure inhibits grain growth and increases the free-charge-carrier concentration to 3.44×1019  cm−3. As the gallium concentration increases in the range 0.05–0.1 mass % in a ceramic of composition ZnO:Ga, the defect luminescence band is suppressed and a characteristic exciton luminescence is formed with a maximum corresponding to 389 nm and a damping time constant of 1.1 ns.
23
Identification of oxygen and zinc vacancy optical signals in ZnO
Bengt Svensson, Andrej Kuznetsov, Peter Klason et al. · Applied Physics Letters · 2006 · 418 citations · Full text
Natural Sciences, Materials Engineering, Materials Science +16
Correlation between green luminescence and morphology evolution of ZnO films
J.D. Ye, Shulin Gu, Feng Qin et al. · Applied Physics A · 2004 · 236 citations
Natural Sciences, Materials Engineering, Materials Science +14