ACS Sustainable Chemistry & Engineering · 2018 · 76 citations · 23 references
Natural SciencesMaterials EngineeringMaterials ScienceMaterials ChemistryMaterials ProcessingNanomaterialsCarbon NanomaterialsCellulose ChemistryAmorphous CarbonCarbon-based Conductive MaterialsDryingDrying ConditionsMaterial Oxygen PermeabilityOxidationPorous Carbon MaterialsPulp Drying
A CO2 laser engraver was used to synthesize conductive graphitic carbon directly on cellulose nanofiber (CNF) substrates under ambient conditions. CNFs were prepared via a TEMPO (2,2,6,6-tetramethylpiperidin-1-oxyl radical)-mediated oxidation reaction of bleached pulp, and a porous paper or a transparent film was obtained based on the drying conditions employed. Laser irradiation on a porous CNF paper led to the formation of amorphous carbon owing to an increase in temperature. Subsequent lasing converted the amorphous carbon to conductive graphitic carbon. The conductivity of this carbon increased from 3 μS/cm to 60 mS/cm as the number of irradiations increased from one to four. Although the CNF paper was converted to graphitic carbon by means of multiple lasing, graphitic carbon was obtained for the CNF film by a single run of lasing owing to its very low oxygen permeability. The conversion of the CNF substrates to graphitic carbon under ambient conditions was attributed to the presence of sodium in CNFs. A control experiment using a CNF in which sodium was replaced with hydrogen demonstrated that only amorphous carbon was produced by laser exposure.
23
Laser-induced porous graphene films from commercial polymers
Jian Lin, Zhiwei Peng, Yuanyue Liu et al. · Nature Communications · 2014 · 2.8K citations · Full text
Natural Sciences, Materials Engineering, Materials Science +12
Laser-Induced Graphene by Multiple Lasing: Toward Electronics on Cloth, Paper, and Food
Yieu Chyan, Ruquan Ye, Yilun Li et al. · ACS Nano · 2018 · 1K citations
Laser‐Induced Graphene Formation on Wood
Ruquan Ye, Yieu Chyan, Jibo Zhang et al. · Advanced Materials · 2017 · 650 citations
Natural Sciences, Materials Engineering, Materials Science +17