A new approach to recycle oxalic acid during lignocellulose pretreatment for xylose production

Banggui Cheng, Xiao Zhang, Qixuan Lin, Fengxue Xin, Run‐Cang Sun, Xiaohui Wang, Junli Ren

Biotechnology for Biofuels · 2018 · 61 citations · 38 references

DOIFull text

Open access

Concepts

Abstract

BACKGROUND: Dilute oxalic acid pretreatment has drawn much attention because it could selectively hydrolyse the hemicellulose fraction during lignocellulose pretreatment. However, there are few studies focusing on the recovery of oxalic acid. Here, we reported a new approach to recycle oxalic acid used in pretreatment via ethanol extraction. RESULTS: The highest xylose content in hydrolysate was 266.70 mg xylose per 1 g corncob (85.0% yield), which was achieved using 150 mmol/L oxalic acid under the optimized treatment condition (140 °C, 2.5 h). These pretreatment conditions were employed to the subsequent pretreatment using recycled oxalic acid. Oxalic acid in the hydrolysate could be recycled according to the following steps: (1) water was removed via evaporation and vacuum drying, (2) ethanol was used to extract oxalic acid in the remaining mixture, and (3) oxalic acid and ethanol were separated by reduced pressure evaporation. The total xylose yields could be stabilized by intermittent adding oxalic acid, and the yields were in range of 46.7-64.3% in this experiment. CONCLUSIONS: emissions and the cost of the pretreatment.

References

38