N-pentane activation and products formation in a temperature-controlled dielectric barrier discharge reactor

Zuliang Wu, Xiaodong Hao, Weili Zhou, Shuiliang Yao, Jingyi Han, Xiujuan Tang, Xuming Zhang

Plasma Sources Science and Technology · 2018 · 23 citations · 34 references

Concepts

Abstract

Abstract Non-thermal plasma has been proposed as a promising technique for the reformation of fossil fuel into cleaner fuel. Despite recent achievements in the economic and technical development of plasma-assisted reforming techniques, a better understanding of thermochemistry and electron-induced chemistry is required to optimize the performance of the relevant systems. We study the relative importance of electron-induced chemistry and thermochemistry for C 5 H 12 (model gasoline) activation and products formation using a temperature-controlled dielectric barrier discharge (DBD) reactor. Important mechanical insight is obtained from the comparison between high-temperature and low-pressure conditions under similar reduced field intensities. In a tested range of background temperatures (303 < T < 623 K), we found that the conversion of C 5 H 12 in the DBD depended only on electron-induced chemistry for the Ar/C 5 H 12 and He/C 5 H 12 mixtures, while it was affected by both electron-induced chemistry and thermochemistry for the N 2 /C 5 H 12 mixture. However, the consecutive reactions from the initiation to the product always depended upon the corresponding thermochemistry for a given temperature. Due to an enhanced electron density and electron energy in the Ar/C 5 H 12 and He/C 5 H 12 DBD, increased C 5 H 12 conversion was observed when compared to N 2 /C 5 H 12 . More importantly, cleaner products were produced from the Ar/C 5 H 12 and He/C 5 H 12 DBD because He and Ar were not involved in the product formation reaction pathways. We also found that extensive thermochemical involvement is favorable for enhancing the performance of plasma-assisted C 5 H 12 reforming. Our findings may not only be useful for a greater understanding of the plasma-assisted reforming process but also helpful in designing a cost-effective plasma reformer.

References

34