Procedia CIRP · 2018 · 27 citations · 8 references
EngineeringIndustrial EngineeringManufacturing EngineeringManufacturing ProcessesManufacturing SystemsProduction EngineeringAssembly SystemsDesign For AssemblyDesign For ManufacturingMachiningManufacturing Systems ArchitectureAssembly System DesignMachining ProcessesProduct Architecture DesignProduct Structure ModelingProduction System ModelingProduction System OptimizationReconfigurable Assembly SystemsReconfigurable Manufacturing Systems
Machining of carbon fibre reinforced plastics (CFRP) is closely related to strong abrasive tool wear and represents a significant process challenge due to its anisotropic material structure and brittle fracture behavior. Furthermore, machining of unidirectional CFRP material shows a significant increase in process forces due to tool wear effects, resulting in a changing micro-geometry of the cutting edge. This research work aims to give a detailed analysis of the tool wear behavior with respect to the five micro-geometry parameters based on an approach of “straight line–ellipse–straight line”, capable also to describe the developing asymmetric cutting edge. Therefore, fundamental orthogonal machining experiments with varying fibre orientations and tool geometries are conducted. It can be shown that the micro-geometry changes with increasing cutting length, whereby an increase of the resulting friction length and spring back height can be detected, having a significant influence on the process forces.
8
Contact and Rubbing of Flat Surfaces
J. F. Archard · Journal of Applied Physics · 1953 · 7.7K citations
Tool wear of coated drills in drilling CFRP
Xin Wang, Patrick Kwon, Caleb Sturtevant et al. · Journal of Manufacturing Processes · 2012 · 228 citations