IEEE Journal of Solid-State Circuits · 2018 · 30 citations · 9 references
EngineeringElectrical EngineeringInstrumentationMicroelectronicsSensorsCalibrationCurrent-voltage CharacteristicsElectrical MeasurementEquipment CalibrationSensor CalibrationState Of Charge EstimationBandgap Reference CircuitsBandgap Reference DesignBandgap ReferencesCurrent Measurement AccuracyLead-acid BatteriesReference Voltage AccuracyState Of Charge CalibrationVoltage Reference Design
Accurate current and voltage measurements are essential for estimating the state of charge of an automotive battery. Typically, circuits are designed to measure low-side current of lead-acid battery. These circuits, however, require a precision reference voltage across a temperature range. In this paper, a design of an on-chip precision bandgap reference with a digitally calibrated technique is described. The bandgap is trimmed for temperature and magnitude and is calibrated digitally. Experimental results show that a maximum of 0.06% variation in the bandgap output for a temperature range of -40 °C-100 °C at a power supply voltage of 3.3 V is achieved. The integrated circuit is fabricated in 0.35-μm standard CMOS technology and occupies an area of 0.23 mm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> .
9
A 1.4 V Supply CMOS Fractional Bandgap Reference
Raymond T. Perry, S.H. Lewis, Amy Brokaw et al. · IEEE Journal of Solid-State Circuits · 2007 · 116 citations