Materials · 2018 · 18 citations · 15 references
EngineeringMaterials EngineeringMaterials ScienceMaterials CharacterizationMaterials ProcessingPolymer EngineeringComposite MaterialsMachiningPolymer ProcessingCutting Tool WearDelaminationEdge TrimmingFiber Volume FractionMachining ProcessesResin Transfer MoldingTool WearTransfer Molding
Although there are many machining studies of carbon and glass fiber reinforced plastics, delamination and tool wear of basalt fiber reinforced plastics (BFRP) in edge trimming has not yet studied. This paper presents an end milling study of BFRP fabricated by resin transfer molding (RTM), to evaluate delamination types at the top layer of the machined edge with different cutting conditions (cutting speed, feed rate and depth of cut) and fiber volume fraction (40% and 60%). This work quantifies delamination types, using a parameter Sd/L, that evaluates the delamination area (Sd) and the length (L), taking into account tool position in the yarn and movement of yarns during RTM process, which show the random nature of delamination. Delamination was present in all materials with 60% of fiber volume. High values of tool wear did not permit to machine the material due to an excessive delamination. Type II delamination was the most usual delamination type and depth of cut has influence on this type of delamination.
15
Machining of Composite Materials
Roberto Teti · CIRP Annals · 2002 · 731 citations
J. Paulo Davim, Juan Carlos Campos Rúbio, Alexandre Mendes Abrão · Composites Science and Technology · 2006 · 542 citations
Natural Sciences, Materials Engineering, Materials Science +14
V.N. Gaitonde, S.R. Karnik, Juan Carlos Campos Rúbio et al. · Journal of Materials Processing Technology · 2007 · 409 citations