Australian Journal of Mechanical Engineering · 2018 · 27 citations · 39 references
Natural SciencesMaterials EngineeringMaterials ScienceCeramic MaterialsCeramicsMechanical Behavior Of MaterialsCeramic CompositesCeramic Matrix CompositesCeramic ProcessingComposite MaterialsMicrostructure ControlPowder ProcessingAluminium AlloysCeramic PowdersHybrid CompositesPhysical PropertiesSilicon CarbideStir CastingTensile StrengthUltimate Tensile Strength
AA6082 matrix hybrid composites reinforced with different weight percentages (wt. %) of (SiC + Gr) ceramic particulates by conventional stir casting process is manufactured. The weight percentage of ceramic powder is varied from 4 wt. % to 12 wt. % in a stage of 4 wt. %. The microstructures, physical properties such as density and porosity, as well as mechanical properties like hardness and tensile strength of the fabricated hybrid composites, are analysed. The optical micrographs reveal the uniform distribution of (SiC + Gr) ceramic particulates in the aluminium matrix. Density and porosity of hybrid composite increases from 2.69 to 2.75 g/cm3 and 0.37% to 1.23% with increase in weight percentage of (SiC + Gr) ceramic particulates in the aluminium matrix from 0 wt. % to 12 wt. % respectively. Both the hardness and ultimate tensile strength have enhanced from 52 to 84 VHN and 163 to 189 MPa, respectively, with a reduction in percentage elongation from 8.6 to 5.2 with rise in weight percentage of (SiC + Gr) ceramic particulates in the aluminium matrix from 0 wt. % to 12 wt. %, respectively.
39
Kazi Md. Shorowordi, Tahar Laoui, A.S.M.A. Haseeb et al. · Journal of Materials Processing Technology · 2003 · 683 citations
Natural Sciences, Materials Engineering, Materials Science +16
Al–Al3Ti nanocomposites produced in situ by friction stir processing
C.J. Hsu, Chun‐Ping Chang, P.W. Kao et al. · Acta Materialia · 2006 · 424 citations
Natural Sciences, Materials Engineering, Materials Science +14