ChemSusChem · 2018 · 19 citations · 46 references
Natural SciencesChemical EngineeringChemistryCatalysisInorganic ChemistryReaction EngineeringCatalyst DesignCatalyst StabilityCatalytic MaterialsCatalytic Reactor DesignHeterogeneous CatalysisSupported CatalystsBifunctional CatalystsCarbon CatalystsCarbon-based CatalystsCatalytic ActivityGas-phase ReactionsMetal CatalystsNanoparticlesThermal Treatment
The condensation of ethanol to 1-butanol in the presence of different catalyst systems based on a Pd dehydrogenating/hydrogenating component and magnesium hydroxide-derived materials as basic ingredient was studied in a fixed-bed reactor. The metal was incorporated by wetness impregnation, and the resulting material was then reduced in situ with hydrogen at 573 K for 1 h before reaction. The bifunctional catalysts were tested in a fixed-bed reactor operated in the gas phase at 503 K and 50 bar with a stream of helium and ethanol. A bifunctional catalyst supported on a synthetic composite based on Mg and high surface area graphite (HSAG) was also studied. Improved catalytic performance in terms of selectivity towards 1-butanol and stability was shown by the Pd catalyst supported on the Mg-HSAG composite after thermal treatment in helium at 723 K, presumably due to the compromise between two parameters: adequate size of the Pd nanoparticles and the concentration of strongly basic sites. The results indicate that the optimal density of strongly basic sites is a key aspect in designing superior bifunctional heterogeneous catalyst systems for the condensation of ethanol to 1-butanol.
46
Structure and Surface and Catalytic Properties of Mg-Al Basic Oxides
J.I. Di Cosimo, V.K. Dı́ez, M. Xu et al. · Journal of Catalysis · 1998 · 1.2K citations
Natural Sciences, Materials Engineering, Materials Science +14
Characterization of Porous Solids
Douglas M. Smith, Duen-Wu Hua, William L. Earl · MRS Bulletin · 1994 · 751 citations
Natural Sciences, Materials Engineering, Materials Science +12