Procedia Computer Science · 2018 · 46 citations · 28 references
EngineeringManufacturing EngineeringMechanical EngineeringDesign OptimizationManufacturing ProcessesOptimizationMachiningMulti-objective Design OptimizationMulti-objective OptimizationProcess EngineeringProcess OptimizationTaguchi MethodsFeedrate OptimizationProcess Parameter OptimizationProcess ParametersProcess Parameters OptimizationSurface Quality ImprovementSurface Temperature AnalysisTurningTurning Operations
In this study, multi-objective optimization for a hard turning of AISI 52100 steel has been presented to provide optimum surface quality, Machining force and work piece surface temperature. Cutting speed, feed, depth of cut and Nose radius are considered as input parameters. Experiments are conducted as per Taguchi L9 orthogonal array. The Parametric investigation is carried out for identifying the effect of input parameters on the response using MINITAB14 software package. Further, multi objective optimization is performed with Grey Relational Analysis (GRA) coupled with Principle Component Analysis (PCA). Results demonstrated that nose radius is the most significant factor affecting the response followed by feed, depth of cut and speed. The optimum cutting parameters obtained are cutting speed 900 rpm, feed rate 0.04 mm/rev, depth of cut 0.6 mm and Nose radius 0.8 mm.
28
Hans Kurt Tönshoff, Christina Arendt, R. Ben Amor · CIRP Annals · 2000 · 518 citations
Engineering, Manufacturing Engineering, Materials Engineering +10
Khaider Bouacha, Mohamed Athmane Yallese, Tarek Mabrouki et al. · International Journal of Refractory Metals and Hard Materials · 2009 · 383 citations
Engineering, Manufacturing Engineering, Mechanical Engineering +14