AIP conference proceedings · 2018 · 22 citations · 14 references
EngineeringMaterials EngineeringMaterials ScienceAdditive ManufacturingMaterials CharacterizationMechanical Behavior Of MaterialsDamage MechanicsDesign For Additive ManufacturingFracture MechanicsImpact BehaviorImpact MechanicsStrength Of MaterialsDynamic Mechanical CharacterizationDynamic Mechanical PropertiesDynamic ResponseElectron Backscatter DiffractionElectron Backscatter Diffraction AnalysisElectron Beam MeltingStructural Impact ResponseTensile Strength
The dynamic mechanical response of additive manufactured (AM) Ti-6Al-4V has been investigated via Split-Hopkinson Pressure Bar (SHPB) and single-stage gas gun plate-impact experiments. Rods of Ti-6Al-4V were manufactured from Arcam and Renishaw electron beam melting (EBM) and laser melting deposition (LMD) powder bed systems, respectively. Horizontal and vertical build directions were produced for plate impacts to determine any effect of build layers on dynamic tensile strength. The as-received microstructures were characterized via optical microscopy and electron backscatter diffraction (EBSD). Johnson-Cook constitutive model parameters were found for the EBM condition via SHPB experiments. Plate impacts producing nominal peak shock stresses near the theoretical tensile strength of the material (3-5 GPa) were conducted to study incipient spall damage conditions as a function of AM material condition.
14
Effect of loading direction on grain boundary failure under shock loading
Saryu Fensin, J. P. Escobedo, Christian Brandl et al. · Acta Materialia · 2013 · 122 citations