Journal of the American Ceramic Society · 2018 · 18 citations · 24 references
Natural SciencesMaterials EngineeringMaterials ScienceCeramic MaterialsCeramicsMicrowave EngineeringMicrowave MaterialsPowder ProcessingRare-earth-doped MaterialsSinteringThermal Properties Of CeramicsThermal Properties Of MaterialsDensificationDensityMicrowave HeatingMicrowave SinteringSpinel Ceramics
Abstract MgAl 2 O 4 samples were microwave sintered to near‐full density in rapid processes with heating rates on the order of 100°C/min and zero isothermal hold. The experiments were carried out using a gyrotron system for microwave processing of materials operating at a frequency of 24 GHz with a maximum power of 6 kW . In the regimes with a preset heating rate sustained by the automatically regulated microwave power, the maximum achieved density was about 95% of the theoretical value in pristine MgAl 2 O 4 samples (maximum sintering temperature 1650°C) and about 97% in 1 wt.% Y 2 O 3 ‐doped samples (1700°C). In the regimes with a fixed microwave power (about 3.5 kW), translucent spinel samples with a relative density above 99% were obtained at 1700°C. The duration of the high‐temperature stage of sintering was 1.5‐10 minutes. The suggested mechanism responsible for the enhanced densification involves development of a thermal instability and formation of transient liquid phases at grain boundaries. The estimated specific absorbed power in the samples during the high‐temperature stage of ultra‐rapid microwave sintering was 27‐80 W/cm 3 , similar to the values observed in dc field‐assisted flash sintering experiments.
24
Joule heating during flash-sintering
Rishi Raj · Journal of the European Ceramic Society · 2012 · 517 citations