Laser Physics · 2018 · 25 citations · 39 references
Natural SciencesMaterials EngineeringMaterials ScienceMaterials CharacterizationSpectroscopic AnalysisSpectroscopyAluminum OxidesElemental Composition AnalysisEmission SpectroscopyLaser SpectroscopyCalibration Curve AnalysisDetonationExplosives AnalysisExplosives ChemistryLaser-induced BreakdownLaser-induced Breakdown SpectroscopyMetal Fuel PerformancePlastic Bonded Explosives
Abstract The aluminized plastic-bonded explosive (PBX) is a composite material in which solid explosive particles are dispersed in a polymer matrix, which includes three major components, i.e. polymeric binder, metal fuel (aluminum) and nitramine explosive. This work introduces a new method on the basis of the laser-induced breakdown spectroscopy (LIBS) technique in air and argon atmospheres to investigate the determination of aluminum content and detonation performance of aluminized PBXs. Plasma emissions of aluminized PBXs are recorded where atomic lines of Al, C and H as well as molecular bands of AlO and CN are identified. The experimental results demonstrate that a good discrimination and separation between the aluminized PBXs is possible using LIBS and principle component analysis, although they have similar atomic composition. Relative intensity of the AlO/Al is used to determine aluminum percentage of the aluminized PBXs. The obtained quantitative calibration curve using the relative intensity of the AlO/Al is better than the resulting calibration curve using only the intensity of Al. By using the LIBS method and the measured intensity ratio of CN/C, an Al content of 15% is found to be the optimum value in terms of velocity of detonation of the RDX/Al/HTPB standard samples.
39
David W. Hahn, N. Omenetto · Applied Spectroscopy · 2010 · 1K citations · Full text
Patricia Lucena, Alicia Doña, Luciano Miguel Tobaria et al. · Spectrochimica Acta Part B Atomic Spectroscopy · 2010 · 155 citations