Advanced Energy Materials · 2018 · 297 citations · 86 references
EngineeringMaterials EngineeringMaterials ScienceEnergy MaterialsMaterials ChemistrySemiconductor MaterialsPhotovoltaic MaterialsSemiconductor Device MaterialsSemiconductor InterfacesSemiconductor SurfacesSolar Cell MaterialsTwo-dimensional Semiconductors2D Material InterfacesCharge ExtractionHalide PerovskitesMoisture StabilityOrganic-inorganic Hybrid PerovskitesPassivation
Abstract To solve the stability issues of perovskite solar cells (PSC), here a novel interface engineering strategy that a versatile ultrathin 2D perovskite (5‐AVA) 2 PbI 4 (5‐AVA = 5‐ammoniumvaleric acid) passivation layer that is in situ incorporated at the interface between (FAPbI 3 ) 0.88 (CsPbBr 3 ) 0.12 and the hole transporting CuSCN is reported. Surface analysis using X‐ray photoelectron spectroscopy confirms the formation of 2D perovskite. Hysteresis is reduced by the interfacial 2D layer, which could be ascribed to improvement of interfacial charge extraction efficiency, associated with suppression of recombination. Moreover, introduction of the interface passivating layer enhances the moisture stability and photostability as compared to the control perovskite film due to hydrophobic nature of 2D perovskite. The unencapsulated device retains 98% of the initial power conversion efficiency (PCE) after 63 d under moisture exposure of about 10% in the dark. A PCE of the control device is boosted from 13.72 to 16.75% as a consequence of enhanced open‐circuit voltage ( V oc ) and fill factor along with slightly increased short‐circuit current density ( J sc ), which results from reduced trap states of (FAPbI 3 ) 0.88 (CsPbBr 3 ) 0.12 as evidenced by enhanced carrier lifetimes and charge extraction. The perovskite/hole transport material interface engineering gives insight into simultaneous improvements of PCE and device stability.
86
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Julian Burschka, Norman Pellet, Soo‐Jin Moon et al. · Nature · 2013 · 9.4K citations · Full text
Natural Sciences, Materials Engineering, Materials Science +12
Interface engineering of highly efficient perovskite solar cells
Huanping Zhou, Qi Chen, Gang Li et al. · Science · 2014 · 6.6K citations
Compositional engineering of perovskite materials for high-performance solar cells
Nam Joong Jeon, Jun Hong Noh, Woon Seok Yang et al. · Nature · 2015 · 6.4K citations
Natural Sciences, Materials Engineering, Materials Science +14