Publication | Open Access
Annealing effect on the structural, morphological and electrical properties of TiO2/ZnO bilayer thin films
43
Citations
27
References
2017
Year
Thin Film PhysicsEngineeringThin Film Process TechnologyElectrical PropertiesNanoengineeringNanoelectronicsAtomic Force MicroscopeThin Film ProcessingMaterials ScienceMaterials EngineeringOxide ElectronicsBilayer Thin FilmsGallium OxideMaterial AnalysisMaterials CharacterizationApplied PhysicsTitanium Dioxide MaterialsThin FilmsMaterial Preparation
The effect of annealing temperature on the structural, morphological and electrical properties of TiO2/ZnO (TZ) thin films has been observed. Bilayer thin films of TiO2/ZnO are deposited on FTO glass substrate by spray pyrolysis method. After deposition, these films are annealed at 573 K, 723 K and 873 K. XRD shows that TiO2 is present in anatase phase only and ZnO is present in hexagonal phase. No other phases of TiO2 and ZnO are present. Also, there is no evidence of other compounds like Zn-Ti etc. It also shows that the average grain size of TiO2/ZnO films is increased by increasing annealing temperature. AFM (Atomic force microscope) showed that the average roughness of TiO2/ZnO films is decreased at temperature 573–723 K and then increased at 873 K. The calculated average sheet resistivity of thin films annealed at 573 K, 723 K and 873 K is 152.28 × 102, 75.29 × 102 and 63.34 × 102 ohm-m respectively. This decrease in sheet resistivity might be due to the increment of electron concentration with increasing thickness and the temperature of thin films.
| Year | Citations | |
|---|---|---|
Page 1
Page 1