Review of machine-vision based methodologies for displacement measurement in civil structures

Yan Xu, James Brownjohn

Journal of Civil Structural Health Monitoring · 2017 · 336 citations · 93 references

DOIFull text

Open access

Concepts

TL;DR

Vision‑based systems offer lower cost, easier installation, and higher frequency and spatial resolution for displacement measurement in civil structures, and roughly one hundred papers have explored system development, field viability, and structural condition assessment. This paper reviews vision‑based displacement measurement, concentrating on methodologies and applications. The review structures video‑processing into a three‑component framework—camera calibration, target tracking, and displacement calculation—presenting methods, advantages, and limitations for each component. It highlights bridge deformation and cable vibration applications, documents field challenges, and identifies gaps such as robust tracking, non‑contact sensing, and field accuracy evaluation.

Abstract

Vision-based systems are promising tools for displacement measurement in civil structures, possessing advantages over traditional displacement sensors in instrumentation cost, installation efforts and measurement capacity in terms of frequency range and spatial resolution. Approximately one hundred papers to date have appeared on this subject, investigating topics like system development and improvement, the viability on field applications and the potential for structural condition assessment. The main contribution of this paper is to present a literature review of vision-based displacement measurement, from the perspectives of methodologies and applications. Video-processing procedures in this paper are summarised as a three-component framework: camera calibration, target tracking and structural displacement calculation. Methods for each component are presented in principle, with discussions about the relative advantages and limitations. Applications in the two most active fields, bridge deformation and cable vibration measurement, are examined followed by a summary of field challenges observed in monitoring tests. Important gaps requiring further investigation are presented, e.g. robust tracking methods, non-contact sensing and measurement accuracy evaluation in field conditions.

References

93