ACS Applied Materials & Interfaces · 2017 · 132 citations · 35 references
EngineeringMaterials EngineeringMaterials ScienceAdditive ManufacturingPolymer EngineeringSoft Robotics3D PrintingElastomeric PolymersHydrogelsPolymer Additive ManufacturingRapid PrototypingSoft GrippersElastomer MechanicsElastomeric MaterialsLight ProjectionMechanical Properties Of Printed PartsSoft Robotics MaterialsTensile StrainTensile TestingWearable Devices
A series of photoresins suitable for the production of elastomeric objects via digital light processing additive manufacturing are reported. Notably, the printing procedure is readily accessible using only entry-level equipment under ambient conditions using visible light projection. The photoresin formulations were found to be modular in nature, and straightforward adjustments to the resin components enabled access to a range of compositions and mechanical properties. Collectively, the series includes silicones, hydrogels, and hybrids thereof. Printed test specimens displayed maximum elongations of up to 472% under tensile load, a tunable swelling behavior in water, and Shore A hardness values from 13.7 to 33.3. A combination of the resins was used to print a functional multimaterial three-armed pneumatic gripper. These photoresins could be transformative to advanced prototyping applications such as simulated human tissues, stimuli-responsive materials, wearable devices, and soft robotics.
35
Ultralight, ultrastiff mechanical metamaterials
Xiaoyu Zheng, Howon Lee, Todd H. Weisgraber et al. · Science · 2014 · 2.2K citations · Full text
Natural Sciences, Materials Engineering, Materials Science +16
Continuous liquid interface production of 3D objects
John R. Tumbleston, David Shirvanyants, Nikita Ermoshkin et al. · Science · 2015 · 2.2K citations · Full text
Embedded 3D Printing of Strain Sensors within Highly Stretchable Elastomers
Joseph T. Muth, Daniel M. Vogt, Ryan L. Truby et al. · Advanced Materials · 2014 · 1.6K citations · Full text