Experimental and numerical study on the composite adhesive joint reinforcement using wavy edge

Abstract

The joints are usually the weakest part of the engineering structures. In this study, the employment of wavy edges for increasing the adhesive joint load-bearing capacity is considered. The effects of geometric parameters of the wavy edges on the strength of the adhesive joints were investigated, experimentally. Two different adhesives, Araldite 2015 and Epoxy RL440/HY441 as ductile and brittle adhesives were used, respectively. The finite element model was also developed for more investigation. The joint stress distributions were used successfully to explain the experimental observations. For the appropriate wavy joint configuration, compressive peel stress on the both ends of the adhesive led to a considerable delay in damage initiation and consequently increased the joint strength. The effects of geometrical parameters of the wavy edge on the joint strength were also examined. For the optimum configuration, the joint with wavy edge offered 32% more strength than the flat single lap joint.