Design and Analysis of a Three-Phase Wireless Charging System for Lightweight Autonomous Underwater Vehicles

Tianze Kan, Ruikun Mai, Patrick P. Mercier

IEEE Transactions on Power Electronics · 2017 · 244 citations · 19 references

Concepts

TL;DR

Lightweight AUVs powered by rechargeable batteries are widely used for inshore surveying, environmental monitoring, and mine countermeasures, but limited battery capacity restricts mission duration, and wireless charging must not interfere with onboard instrumentation. The paper proposes a three‑phase wireless charging system for a field‑deployable charging station to extend AUV mission times with rapid, efficient, and convenient recharging. The authors use a 3‑D finite element model to analyze magnetic fields inside the AUV, perform detailed circuit analysis and resonance compensation for transmitter and receiver, and build a prototype three‑phase wireless charging system. Simulations show the coil’s magnetic field is concentrated away from the AUV’s center, avoiding instrumentation, and experiments confirm 1.0 kW transfer with 92.41 % dc‑dc efficiency at 465 kHz.

Abstract

Lightweight autonomous underwater vehicles (AUVs), powered by rechargeable batteries, are widely deployed in inshore surveying, environmental monitoring, and mine countermeasures. While providing valuable information in locations humans have difficulty accessing, limited battery capacity of such systems prevents extended mission times. In order to extend mission times, this paper proposes a three-phase wireless charging system that could be used in a field-deployable charging station capable of rapid, efficient, and convenient AUV recharging. Wireless charging should not, however, affect instrumentation located inside the AUV. Thus, a three-dimensional finite element analysis tool is employed to study the characteristics of magnetic fields inside the AUV during three-phase charging. Simulation results reveal that the magnetic field generated by the proposed three-phase coil structure is concentrated away from the center of the AUV, where instrumentation would nominally be located. Detailed circuit analysis and compensation method to achieve resonance on both transmitter's and receiver's sides are also given. To validate the proposed concept, a three-phase wireless charging system is developed. Experimental results demonstrate that the system is able to transfer 1.0 kW with a dc-dc efficiency of 92.41% at 465 kHz.

References

19