Journal of Applied Polymer Science · 2017 · 25 citations · 40 references
Natural SciencesMaterials EngineeringMaterials SciencePolymer ChemistryPolymer EngineeringPolymer MaterialsElastomeric PolymersFracture ToughnessMechanical Properties Of BiomaterialsPolymer CharacterizationStrength PropertiesDielectric SpectroscopyDynamic Mechanical CharacterizationDynamic Mechanical PropertiesEpoxy ResinsImpact StrengthInterfacial CompatibilityStorage ModulusToughness
ABSTRACT This article deals with enhancement of the toughness of epoxy resin (ER) based on diglycidyl ether bisfenol A by either polydimethylsiloxane (PDMS) or vinyl‐terminated polydimethylsiloxane (VT‐PDMS). To improve the compatibility of these two phases, dicumylperoxide (DCP) was used as a compatibilizer. It was established that only specific composition of the components can lead to enhancement of ER toughness without significant reduction of storage modulus, T g , and interphase adhesion. The highest impact strength was recorded for ER with VT‐PDMS (10 wt %) and DCP (2 wt %) due to increased interfacial compatibility between two phases, which was proved by 1 H NMR and dielectric spectroscopy. Critical ductile brittle transition occurring between 10 and 15 wt % of rubber was observed by both morphological and dynamic mechanical analysis studies. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135 , 45720.
40
Lorena Ruiz‐Pérez, Gareth Royston, J. Patrick A. Fairclough et al. · Polymer · 2008 · 298 citations · Full text
Natural Sciences, Materials Engineering, Materials Science +17